Soil automatic direct shear tester YJRB-B
Introduction:
The constant strain controlled direct shear instrument is used to measure the shear strength of soil. Usually, a specimen is applied to shear force under different vertical pressures to obtain the shear stress at the time of failure, and the shear strength coefficient, internal friction Angle and cohesion are determined according to Coulomb's law.
The instrument is composed of direct shear tester, pressure control system, direct shear acquisition controller, air pump and upper computer software.
The software of the direct shear upper computer displays vertical pressure, shear force and displacement, and can set the speed. The software can run under Windows operating system, and can realize the automatic extraction, storage, printing and export of the data of the acquisition instrument. The instrument conforms to national standard, ministry standard, line standard and other current effective relevant test specifications.
Composition and principle of the instrument:
The instrument is composed of test host, normal load regulator, controller, air source and computer control system.
Principle: The instrument is controlled by a single chip microcomputer stepping motor to drive the shear mechanism, and the maximum normal load, horizontal load, normal displacement and horizontal displacement are measured by the force sensor and the displacement sensor respectively. The USB port connects the controller to the PC. The upper computer software is a matching control system with the shear machine host, which is mainly used for system operation and control of the host. The software can be run under Windows7 operating system, can achieve the consolidation data extraction and view, cut data extraction and view, print, export and other functions.
Test host: consists of normal loading system, horizontal loading system, normal displacement system, consolidation shear box, etc.
Regulator: Connect air pump and cylinder to control normal load.
Name:Soil automatic direct shear tester
Model:YJRB-B
Technical parameter
Maximum normal load: 10kN (±10N) pressure
Maximum horizontal shear force: 30kN(±10N)
Vertical loading grades: 50,100,200,300,400 kPa
Specimen diameter: Φ100mm×100mm
Specimen area: 78.5cm2
Maximum shear displacement stroke: 30mm Accuracy: 0.01mm (protection stop).
Shear speed: 0.01~30mm/min can be set arbitrarily.
Power supply: 220V±10% 50Hz±2Hz.
Working environment: Temperature 20±5ºC, relative humidity 80%RH, environment without strong magnetic, strong vibration and other interference.
){kind=link}